|
||||||||||||||
|
||||||||||||||
| 1064nm Polarization Beam Combiner/Splitter | |
| The
1064nm Polarization Beam Combiner can combine two orthogonal polarization into one output fiber. The typical configuration uses the two
PM fibers for the input and the SM fiber for the output. Polarization
beam splitter can split the input signal into two outputs. The device
provides high extinction ratio with low loss. |
|
|
Specifications - 1064nm Polarization Beam Combiner or Splitter |
|
| Parameters |
Values
|
| Operating Wavelength |
1064 +/-20nm
|
| Insertion Loss |
<0.8dB
|
| Extinction Ratio |
³
22dB
|
| Return Loss |
>50dB
|
| Max. Optical Power (CW) |
500mW
|
| Max. Tensile Load |
5N
|
| Fiber type port 1 and 2 |
PM 980 panda fiber
|
| Fiber type port 3 |
Corning HI1060 or PM panda fiber |
| Operation Temperature |
-5 to +70°C
|
| Storage Temperature |
-40 to +85°C
|
| Note1: Values specified are without connector loss. | |
| Note2: The PM fiber and the connector key are aligned to the slow axis. | |
|
Package Dimensions - Polarisation Beam Combiner or Splitter |
||
|
|
|
|
| Ordering Information - 1064nm Polarisation Beam Combiner or Splitter | |
| POBC-64-W-X-Y-Z | |
| POBS-64-W-X-Y-Z | |
| W: Pigtail type | B - 250 um panda fiber, L - 900um loose tube panda fiber |
| X: Fiber type for port 3 | 1 - HI 1060 fiber, 3 - Slow axis align to port 1, C - 3mm cable, S - Specify |
| Y: Pigtail length | 5- 0.5m, 7 -0.75 m, S - Specify |
| Z: Connector | 1 - FC/UPC, 2 - FC/APC, 0 - None |
| Home | products | Services | Contact | more 1064nm components | Search |
 |
| © |
| Voice: + 613 9702 4402 Fax: +613 9702 4877 |
|
Webmaster:
webmaster@afw
Last modified: 12th July 2010 |
